How to connect the cable of the soundproof box diesel generator set
How to connect the cables of the generator set
Schematic diagram of connecting cables for generator set
The steps for connecting cables to a silent diesel generator set are as follows:
Taking Cummins diesel generator set as an example, confirm the rated voltage and current matching between the generator set and the cable.
If not matched, it may cause cable overload or the generator set to be unable to output power normally.
Turn off the power switches for the generator set and receiving cables, ensuring that the power has been disconnected.
Open the control box of the silent diesel generator set and locate the output terminal board. Generally speaking,
the output terminal board will be labeled as “L1”, “L2”, “L3”, etc. Select appropriate output terminals for wiring based on the number and labeling of cable wires.
Use cable stripping pliers to strip off a section of the insulation layer of the cable,
exposing the conductor. Connect the conductors to the corresponding output terminals according to the markings on the cable wires. Be careful to firmly fix the conductor to avoid loosening.
Connect the other end of the cable to the device receiving power. Connect the conductor to the corresponding input terminal according to the wiring label of the device.
Check all wiring points to ensure good cable contact and no looseness.
Turn on the generator set and the switch for receiving power, and check if the equipment is working properly.
It should be noted that before wiring, it is necessary to ensure that the generator set and the receiving power supply have been disconnected.
At the same time, caution should be taken during the wiring process to avoid electric shock or other safety accidents.
The cable connection method for the soundproof box diesel generator set and the ordinary diesel generator set is the same.
To accurately operate the connection cable of the diesel generator set, you can contact the manufacturer for information
